Home/Shop/CPU Cooler/DeepCool AG500 V2 Black
DeepCool AG500 V2 Black
CPU CoolerDeepcool

DeepCool AG500 V2 Black

6.000 L
In stock· Ships within 24h

The V2 adds an illuminated top cover to a black five-heat-pipe tower, paired with a 120mm PWM ARGB fan. Overall height: 160mm.

1

Delivery

Estimated courier delivery: 24–48 hours after dispatch.

Estimate delivery cost

The same rate applies to every city in Albania.

For 1 of this product. The final fee is recalculated at checkout for your full basket.

Cash on delivery, or pay in store when collecting.

Collect in Durrës with no delivery fee. Wait for confirmation that your order is ready.

Complete your setup

Optional extras, sold separately.

Extras total: 0 L

One of each selected item. Add the main product separately.

DeepCool AG500 V2 Black: light across the top of the tower

The top of an air cooler is often the part you see most clearly through the side panel. AG500 V2 Black makes that surface part of the design, with an illuminated cover above a dark fin stack and a matching ARGB fan at the front.

DeepCool AG500 V2 Black CPU air cooler, assembled view
The correct V2 model with its illuminated top cover.

The V2 detail you will notice

The lit top cover distinguishes this V2 from the older exposed-tip AG500. It brings colour to the upper face as well as the fan, which is useful when the case’s viewing angle hides much of the front.

Try a single colour shared with the case lighting if you want the tower to sit naturally within the whole build.

Five heat pipes in a single tower

Five 6mm heat pipes carry heat into the fin stack, with one 120mm fan moving air through it. This keeps the assembly in a conventional air-cooling layout. Plan intake and exhaust together so the cooler receives fresh air and has somewhere to send it.

Cooling results depend on the processor’s load, power limits and the surrounding airflow; a heat-pipe count alone is not a temperature prediction.

DeepCool AG500 V2 Black, the underside shows the five heat pipes and contact surface
The underside shows the five heat pipes and contact surface.

Measure the 160mm height

Use the overall 160mm height when checking case compatibility, rather than the bare heatsink measurement. Check RAM clearance with the fan in its intended position, especially if you use tall modules.

The PWM and ARGB cables have separate jobs. Connect the fan to CPU_FAN and the 3-pin lighting cable to a compatible 5V ARGB header or controller.

Make the first setup count

  • Check socket hardware before attaching the heatsink.
  • Leave space for the cover and fan clips.
  • Route cables away from the rotating blades.
  • Test a moderate fan profile under your normal workload.

AG500 V2 is a fitting choice when you want the CPU area to carry the lighting theme while retaining a single-tower arrangement.